Case Building Apparatus is filling the space between its compact and medium-size wheeled loaders, with the brand new 421G.
The 421G is the primary Case wheeled loader within the 100hp section. With an running weight of 8,970kg, it’s designed to paintings with a 1.5 m3 same old bucket, or a 1.7 m3 mild subject material bucket.
Powered by way of a three.6-litre FPT turbocharged diesel engine, the 421G has a rated energy of 72kW (97hp) and a height energy of 84kW (112hp) at 2,000rpm. That is subsidized by way of 453 Nm of torque. The engine makes use of FPT’s SCR-T after-treatment device to minimise emissions and the gadget is supplied as same old with an ECO running mode and cruise keep watch over to cut back gasoline intake.
The engine drives via a two-speed ‘shift-on-fly’ hydrostatic transmission, that gives a continuing transition between the 2 force levels, handing over a 40 km/h most pace with a 20 km/h pace limiter as an choice. The transmission additionally has a creep environment as same old. The axles are heavy-duty, with same old restricted slip differential entrance and rear and an non-compulsory 100% differential lock.
Even though running inside compact total dimensions, the 421G has a instantly tipping load with a typical bucket of 6,500 kg, with a complete flip tipping load of five,500 kg. When provided with pallet forks, that complete flip tipping load is 4,200 kg.
Payload with forks is 3,360 kg and the elevate fingers have a hinge pin peak on 17.5 R25 tyres of three,707 mm. With a bucket, the breakout power is 7,161 kg; the gadget comes with increase and bucket environment modes and with increase flow as same old.
The closed centre hydraulic device makes use of a variable displacement pump with load sensing and float sharing features for simple blended motion of the elevate fingers and bucket tilt cylinder. Prime float hydraulics ship a most float of 125 litres/min with a most power of 220 bar, making this compact gadget “a perfect instrument service for a spread of powered attachments”, Case says. The operator too can alter hydraulic float to fit the applying.
Were given a tale? Electronic mail information@theforklift-dealerzone.com
